I have a couple of bulbs burnt out on my 1991 Toyota Pickup with automatic transmission. Are these the type of bulbs readily available at my local auto parts store? Thanks
I have a 1991 Toyota regular bed, rear wheel drive, 4 cylinder automatic with 44,000 mile that sat under a shed for 3-4 years. I took it to a very reputable wheel and suspension shop here in west palm beach. They assured me that the front end is in good shape although they an alignment. I...
I have a 1991 Toyota regular bed, rear wheel drive, 4 cylinder automatic with 44,000 mile that sat under a shed for 3-4 years. I took it to a very reputable wheel and suspension shop here in west palm beach. They assured me that the front end is in good shape although they an alignment. I...
Do you know how to remove the plastic covers over the base of the door rearview mirrors? Mine are not powered. I see a seam between the two halves. Just don't want to bust the plastic. The FSM doesn't explain this. Thanks
I have a 1991 Toyota Pickup, 2 wheel drive with manual windows. Behind the window crank is a little round plastic plate that keeps the crank from rubbing on the vinyl door panel. Mine deteriorated. Anyone know where to get them or has anyone come up with a homemade alternative. Thanks
I own a 1991 two wheel drive Toyota pickup (no tach). I'm getting a sheesh, sheesh, sheesh type sound coming from one or the other that corresponds in rate to the speed of the truck. It doesn't begin until I've driven the truck for about a mile and something then heats up and expands I guess...
I have a 1991 toyota pickup with 22RE engine, EFI, automatic tranny. Is TDC 0 or 5 degrees and do you know the page in the FSM that mentions this? Thanks
My temperature gauge is always between the half way point and all the way to the left or, 1/4 of the way up. Is that normal or should it be at about half way up. If it's not correct, what should I take a look at? Thanks
OK, I got a response that told me how to adjust the idle with the A/C on so that worked.
Bought a timing light, jumped out E1 & TC1 and timing was way off. So I got that done.
Biggest problem now is a tingley, metallic sound in the top end which I hear when I come off idle to say, 2000 RPM and...