-
FREE SPEECH SOCIAL MEDIA
If you're looking for a Free Speech Social Media site, check out Blabbook.com
- NO FACT CHECKING - NO SHADOW BANNING - NO POINT OF VIEW CENSORSHIP
black baja wheels for a 4runner
- Thread starter sacky789
- Start date
What year are you looking at for those 16" tacoma black baja's? I think that as long as the bolt pattern will line up you're good to go. They should all be light-duty 6-bolt rims and they should have the same spacing. I'm not 100% on that, but I'm pretty sure.
Is there any way you can try one out before you buy, or are you looking at getting some shipped to you, off craigslist or something like that?
I'm going to say that I'm 80% sure they'll line up, but there could be a difference on the year (like if you get 2012 Baja Rims and put them on the 2002).
Is there any way you can try one out before you buy, or are you looking at getting some shipped to you, off craigslist or something like that?
I'm going to say that I'm 80% sure they'll line up, but there could be a difference on the year (like if you get 2012 Baja Rims and put them on the 2002).
If it fits a Tacoma it'll fit a 4Runner.
One thing to watch out for though is not all wheels advertised to fit Tacoma and 4 Runners are a simple bolt on affair.
Some of the steel wheels with holes, like outlaws for instance wont fit unless you shave the caliper about a 16th of an inch and shave the inside bottom edge of the lip on the holes, without this clearance the wheel will rub the caliper.
One thing to watch out for though is not all wheels advertised to fit Tacoma and 4 Runners are a simple bolt on affair.
Some of the steel wheels with holes, like outlaws for instance wont fit unless you shave the caliper about a 16th of an inch and shave the inside bottom edge of the lip on the holes, without this clearance the wheel will rub the caliper.
Related Content You Might Like: