SPT100
New Member
Hello everyone,
I'm looking for some advice on the removal of my T100 instrument cluster. I need to replace one of the bulbs, and will probably replace them all since it is such a pain to access them. I have followed my Haynes manual instructions, but for some reason I can not get the instrument cluster free. So far all the finish panels have been removed and the four screws holding in the cluster itself are out. I can't really see behind the cluster and I do not want to just yank it out. I suspect there are cables attached to the transmission for the odometer and power for the other gauges, but I just can't find a way to get it removed. Youtube has not helped, nor have general online searches.
I'd love to hear how to do this if anyone here has taken on that task.
Thanks!
I'm looking for some advice on the removal of my T100 instrument cluster. I need to replace one of the bulbs, and will probably replace them all since it is such a pain to access them. I have followed my Haynes manual instructions, but for some reason I can not get the instrument cluster free. So far all the finish panels have been removed and the four screws holding in the cluster itself are out. I can't really see behind the cluster and I do not want to just yank it out. I suspect there are cables attached to the transmission for the odometer and power for the other gauges, but I just can't find a way to get it removed. Youtube has not helped, nor have general online searches.
I'd love to hear how to do this if anyone here has taken on that task.
Thanks!
Last edited: