• FREE TTC WINDOW STICKERS >>

    08/08/2019 - We've been updating the site. As a thank you for putting up with the mess we're giving away a free ToyotaTruckClub sticker to everyone who asks for one ... until they're all gone.

Search results

  1. kennythewelder

    Someone put SUPER GLUE on my door handle. Getting it off.

    Oh and use very light pressure when sanding.
  2. kennythewelder

    Someone put SUPER GLUE on my door handle. Getting it off.

    After sanding, you will need to buff out the sanding scratches with a D A buffer and some white polishing compound, then you can wax after its buffed out. Go through a few of these videos for guidance. https://www.youtube.com/results?search_query=wet+sanding+and+buffing
  3. kennythewelder

    Shining & polishing under the hood

    Buffed out the rims, and did a final buff out on the large bow tie, and painted the small one. I also installed the rivet nuts in the hood to bolt the bow ties to, after I sprayed bed liner under the hood, where the old insulation was. Oh and I shined the banner on the tailgate, and buffed the...
  4. kennythewelder

    Polishing out scratches in your truck? What do you use?

    A deep scratch will need to be filled with some clear coat. A real deep scratch will need to be filled with touch up paint, then sanded with some 600 wet sand paper on a sanding block. I have even used a small wooden block I cut from some scrap. You never want to sand by hand, without a sanding...
  5. kennythewelder

    Polishing out scratches in your truck? What do you use?

    A DA polisher works wonders. Some turtle wax, white polishing compound, a fleece bonnet, and a few terry cloth bonnets will work wonders. The after the buff out with the polishing compound, a buff out with the terry cloth bonnets and some wax. Then a hand wax. That is how my wife got our 4...
  6. kennythewelder

    Someone put SUPER GLUE on my door handle. Getting it off.

    Acetone should be ok. I have been using it on a lot of things lately. The worst thing it will do, is dry out the plastic. Is this happens, you can always put some thing like 303 on it, or I have even used baby oil and seen olive oil used before. I used to use baby oil on my dash and door panels...
  7. kennythewelder

    Someone put SUPER GLUE on my door handle. Getting it off.

    Man, Steve, is your truck cursed or what. Maybe you do need to trade it in on something else. IDK. In the old days, you would have a talk with there Dads, but not today. I guess you need to set up a camera to catch the idiots that do things like this.
  8. kennythewelder

    96 Seat Replacement ~ Toyota T100 Driver's Side

    If you can make a bracket, then you can put any seat you want in the truck. I once took a set of bucket seats out of a Pontiac Sunbird, and put them in a Nissan king cab. The guy at the junk yard said, those seats wont fit in there. I said yes they will, Im a welder. Seats are bolted or riveted...
  9. kennythewelder

    Towing with Sequoia ~ 2007 Limited

    Yes. If anything that may be a little under rated. There has to be a safety factor built into those numbers. The real factor is not towing that much weight, its stopping it, once its rolling down the road, but with a 6200# rating your good at a leaser weight. Welcome to the forum.
  10. kennythewelder

    2007 Tundra Stuck in 4LO

    Yea, your just running in limp mode. You will need to fix the problem, then clear the codes. My 04 - 4 runner 2WD has been in limp mode for about 2 years. I think its my cats, but its very expensive to replace 4 cats. Toyota does not share there ECM technology. You could go to autozone and have...
  11. kennythewelder

    Weekend Projects & Plans? 2019 Thread!

    Well I got wall board installed, after replacing the insulation last night. Thank God my wife is a painter. Her dad did that for a living for years, and all 6 of His kids helped at one time or another. I worked with Him too for a while in the 1980s. God rest His sole.
  12. kennythewelder

    Weekend Projects & Plans? 2019 Thread!

    Well I got the black outer wall board sealed up.
  13. kennythewelder

    Weekend Projects & Plans? 2019 Thread!

    Finished tearing out the rest of the paneling in the 2ed bedroom. Now I will fill in the gaps in the black wall board. Then put in new insulation and new luan wall paneling. The green looking Stuff at the top of the first pic, is a 3/4" gap in the black board between the bricks and wall studs...
  14. kennythewelder

    Show off your TTC stickers.

    Lol hey, happy wife, happy life. If She says there are three planets in the solar system, I just say yes dear. Ok, not really. Im just smart enough to pick my fights.
  15. kennythewelder

    Show off your TTC stickers.

    My wife got the sticker in the mail yesterday. By the time I got home, She had installed it, but She cuts off truck club first. It still looks good though.
  16. kennythewelder

    Weekend Projects & Plans? 2019 Thread!

    Wow Steve, I wish I had that much energy, just not that much work LOL.
  17. kennythewelder

    What are Toyota Pickups Selling For?

    I know I have seen 4X4s for $4500 to maybe $6000. The 2 WD is all that came up on local CL. $8000 would be a lot of the silver one, in my area. It would have to be mint and have very low miles to bring $8000 in my area.
  18. kennythewelder

    What are Toyota Pickups Selling For?

    And this is what I mean about the price difference,from place to place.(although this one look like a 2 WD) A $4000 difference. Click the link. 93 Toyota Pickup
  19. kennythewelder

    First Truck, First Toyota, First Post

    Welcome to the forum.
Top