So over the last few days I have done a bunch of work to my T100.
I needed to replace the valve cover gaskets. I also changed out the spark plugs with NGK, new wires that are NGK, replace the fuel injectors with remaned injectors. I didn't replace either intake gasket as they were both in very good shape.
Well I got it all out back together today and now it won't start. It ran for like 15 seconds the first time I tried to start it but it ran really bad. I would a vacuum line I missed and put it back on but not i get nothing.
It cranks just fine but won't fire up. Every now and then it'll act like it is going to, it'll pop then clunk then just go back to turning over.
Any help would be greatly appreciated as I am currently over my head.
1996 Tpyota T100 SR5 3.4
I needed to replace the valve cover gaskets. I also changed out the spark plugs with NGK, new wires that are NGK, replace the fuel injectors with remaned injectors. I didn't replace either intake gasket as they were both in very good shape.
Well I got it all out back together today and now it won't start. It ran for like 15 seconds the first time I tried to start it but it ran really bad. I would a vacuum line I missed and put it back on but not i get nothing.
It cranks just fine but won't fire up. Every now and then it'll act like it is going to, it'll pop then clunk then just go back to turning over.
Any help would be greatly appreciated as I am currently over my head.
1996 Tpyota T100 SR5 3.4
Last edited by a moderator: