1st-Synthetics
New Member
Fumoto Quick Oil Drain Valve Pricing for All ToyotaTruckClub.com Members.
Introducing the best way to change oil, the Engine Oil Drain Valve. Install this valve and you can drain your engine oil without tools and without mess. Just lift the lever of this solid brass ball valve and give it a quarter turn to open it. Return the lever to its original position and it locks closed, double sealed to prevent leakage. The Engine Oil Drain Valve is made of corrosion resistant forged brass and stainless steel. The ball valve design provides a straight flow for efficient drainage and a perfect seal when closed. Frozen drain plug and stripped threads are eliminated forever. Drawing samples for oil analysis is as easy as one-two-three. Sizes to fit all cars, light trucks vans heavy-duty trucks and buses. Also fits RVs, marine engines and industrial equipment. (N-Series Valve(w/Nipple)).
N-Series Valve:The Engine Oil Drain Valve is also available with "Nipple" to accept hose. It makes oil changing easy for industrial engines, boat engine and other hard-to-reach applications.
Endorsements:
The Engine Oil Drain Valve has been tested and granted "Genuine Parts" status by 6 major motor vehicle manufacturers in Japan, including Toyota, Nissan, Mazda, Mitsubishi, Subaru and Isuzu. These approvals were not granted easily and gaining them was a testimony to the quality and durability of Engine Oil Drain Valve. In the United States, the Engine Oil Drain Valve is being installed at the factory level on some of the vehicles/equipment made by Ford, Kohler, Freightliner, Caterpillar, JLG, GEHL, Ingersoll-Rand, Sullair, Toyota, Case, Magnetek, Timberjack, Lincoln Electric, Vermeer, Baldor, Terex, Deutz, Phaser Marine Generator and etc.
Installation:
Pricing for forum members:
Fumoto F series valve (no hose nipple): $24.00
Fumoto "N" series valve (With Nipple): $26.00
Pricing includes FREE shipping to the 48 continental US Sates. Please contact me for shipping to other locations.
N-Series Valve:The Engine Oil Drain Valve is also available with "Nipple" to accept hose. It makes oil changing easy for industrial engines, boat engine and other hard-to-reach applications.
Endorsements:
The Engine Oil Drain Valve has been tested and granted "Genuine Parts" status by 6 major motor vehicle manufacturers in Japan, including Toyota, Nissan, Mazda, Mitsubishi, Subaru and Isuzu. These approvals were not granted easily and gaining them was a testimony to the quality and durability of Engine Oil Drain Valve. In the United States, the Engine Oil Drain Valve is being installed at the factory level on some of the vehicles/equipment made by Ford, Kohler, Freightliner, Caterpillar, JLG, GEHL, Ingersoll-Rand, Sullair, Toyota, Case, Magnetek, Timberjack, Lincoln Electric, Vermeer, Baldor, Terex, Deutz, Phaser Marine Generator and etc.
Installation:
|
Pricing for forum members:
Fumoto F series valve (no hose nipple): $24.00
Fumoto "N" series valve (With Nipple): $26.00
Pricing includes FREE shipping to the 48 continental US Sates. Please contact me for shipping to other locations.
Toyota sizing:
All models from 1993 & on | F-103 |
85 & on Tercel, Celica, MR2, Gas Corolla, Gas trucks | F-103 |
Van('86 & on), Camry('88 & on), Land Cruiser('87 August & on) | F-103 |
Land Cruiser(up to '81) | FG-5 |
Land Cruiser('82 to '87 July), & all other models | F-104 |
Attachments
-
37.6 KB Views: 330