I used 2.5" flanges to match my Long Tube Headers After welding them to 2.5" aluminized tubing I drilled a couple holes on my neighbors drill press.
Outer core is 5" aluminized tubing from a big rig supply.
These are the ends of the outer body tubes, I cut these out with my plasma, I now have em cut out by my local water jet shop.
This is where it'll be welded
For simplicity I welded the 02 sensor bung to these mufflers. I now make just the muffler and put the bung in the 'h' pipe.
I do these a little different now but here's how I welded it together
packed up
another picture
Done!
Up Close!
Outer core is 5" aluminized tubing from a big rig supply.
These are the ends of the outer body tubes, I cut these out with my plasma, I now have em cut out by my local water jet shop.
This is where it'll be welded
For simplicity I welded the 02 sensor bung to these mufflers. I now make just the muffler and put the bung in the 'h' pipe.
I do these a little different now but here's how I welded it together
packed up
another picture
Done!
Up Close!