2014 RAV4 Limited AWD
Reset the maintenance data (U.S.A. only) - owners manual page 521
After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data. (Maintenance Data Light comes one every 5,000 miles per reset)
To reset the data, follow the procedure described below:
*** Vehicles without a smart key system ***
1. Switch the display to the trip meter A (→P. 88) and then turn the engine switch to the “LOCK” position.
2. While pressing the “DISP” button (→P. 88), turn the engine switch to the “ON” position (do not start the engine because reset mode will be canceled).
3. Continue to press and hold the button until the trip meter displays “000000”.
*** Vehicles with a smart key system ***
1. Switch the display to the trip meter A (→P. 88) and then turn the engine switch off.
2. While pressing the “DISP” button (→P. 88), turn the engine switch to IGNITION ON mode (do not start the engine because reset mode will be canceled).
3. Continue to press and hold the button until the trip meter displays “000000”.
Reset the maintenance data (U.S.A. only) - owners manual page 521
After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data. (Maintenance Data Light comes one every 5,000 miles per reset)
To reset the data, follow the procedure described below:
*** Vehicles without a smart key system ***
1. Switch the display to the trip meter A (→P. 88) and then turn the engine switch to the “LOCK” position.
2. While pressing the “DISP” button (→P. 88), turn the engine switch to the “ON” position (do not start the engine because reset mode will be canceled).
3. Continue to press and hold the button until the trip meter displays “000000”.
*** Vehicles with a smart key system ***
1. Switch the display to the trip meter A (→P. 88) and then turn the engine switch off.
2. While pressing the “DISP” button (→P. 88), turn the engine switch to IGNITION ON mode (do not start the engine because reset mode will be canceled).
3. Continue to press and hold the button until the trip meter displays “000000”.