Ha, I found the issue... I was testing again with a voltmeter and got the light to flicker. After some investigation I noticed that when I touched the prod to the metal piece holding the light, and simultaneously touched the post that was supposed to connect that plate to the circuit, I caused...
The Dome light in my truck would go through about 2 light bulbs a year. Now I can't get any thing out of it.
I've searched the fuse, checked with a voltmeter... nothing.
Where is the common break? is there a common fix?
Greetings! I'm hoping somebody here can help me.
I had to replace the master cylinder in my brake system. I noticed immediately after that my cruise controls seemed weak. It couldn't keep me up to speed. Upon inspection I noticed that a vacuum line was disconnected, I reconnected it, and we...
I replaced the Master Cylinder Saturday, didn't get to the slave cylinder because I'm not sure how to disconnect the hydraulic line from the front of the unit...
The shifting is a little better but I've had to adjust the free play 2 times since. Is that normal for a new cylinder? The free play...
TruckRider
I am currently working on a construction project in small-town Oregon and don't have parts available to me. I adjusted the linkage on the master cylinder and noticed some difference but I have zero free play in the pedal and I'm still grinding. I ordered a master and slave cylinder...
I bled about 3/4 pint of break fluid through the system about 2 years ago, I noticed no difference. I didn't know that you can adjust the slave cylinder, everybody I asked said that the hydraulic systems don't adjust?
The tephlon ring, when you say the shifter housing, are you taking about...
93 Toyota extended cab pickup, manual transmission.
I've had my 93 Toyota extended cab for 4 years now and the problem hasn't gotten worse. When I purchased it I noticed that it was a little difficult to get the truck into first gear unless you were almost stopped, and then getting into reverse...