• FREE SPEECH SOCIAL MEDIA

    If you're looking for a Free Speech Social Media site, check out Blabbook.com

    - NO FACT CHECKING - NO SHADOW BANNING - NO POINT OF VIEW CENSORSHIP

VENT WINDOW REMOVAL - ISSUE

zoomie97

New Member
I am getting ready to get my 1981 Toyota Diesel truck painted, and I was removing all the hardware, and old weather stripping. How do I get those darn vent windows out. The weather stripping is kind of out (minus around the bottom post), and the screw on top is removed. What is the trick to get the window itself out?
 

tbplus10

Moderator
Staff member
1000 Posts
Community Leader
There should be a screw on the upward angle of the door frame holding the top of the vent window frame and a bolt or two down inside the door behind the door panel holding the bottom of the frame.
 

tbplus10

Moderator
Staff member
1000 Posts
Community Leader
No screw at the top of the frame though?
Ive seen them with 1 or 2 bolts/nuts at the bottom but they always had a screw at the top too.
How does the top lock in?
The spring is for tension and to stop vibration.
 

tbplus10

Moderator
Staff member
1000 Posts
Community Leader
OK, I was thinking you were taking out the whole vent window with frame.
The frame is part of the main window track.
 

zoomie97

New Member
Thank you for the help. I got it out, by bending back the tabs and taking out the bolt. I am sure the assembly will be a lot of fun.
 

Related Content You Might Like:

Top