what have you done to your yota this week
I just bought a light weight fly wheel and a stage 2 clutch from urdusa.com and 2 weeks ago I bought the releas fork and throw out bearing
05 tacoma trd sport with graphics, chrome kit, aftermarket tail lights, cleared head lights, dual exshault, volant cold air intake with ram air scoop, throttle body spacer, 6 inch fabtech lift, 34.5 inch tires , 17x9 dick cepeck dc1 black and sliver rims, westin bull bar and step bars, and a aftermarket toyota emblem, 5 percent tint in the back and side windows and 50 percent on the driver and passenger windows
Tacoberfest 09 pics comming soon
Tacoholic
Lol, this week? How about a solid wash and wax after all of the rain that we got in DFW!
~~~ Life is short - play hard and keep your engine running ~~~
All Members: Fill out your Profile and Signature
I broke 2 motormounts, taco'd a rim, and blew the fuse that protects the 02 sensors and map. All in a couple hours of mobbing. :( Gotta fix it before next weekend!
That doesn't sound fun!!
Nothing much done to mine this week, last week I installed a CravenSpeed stubby antenna and removed the little cheap metal baffles from the horn.
2011 Toyota Tundra CrewMax SR5, 5.7 V8, Chrome Door Handles,
International Brotherhood of Tundra Owners
Lol! It's not fun now, but it sure was when I was out there. There's a huge meet out there this coming weekend so it's a scramble.
Bought two break lines for the front of my yota and changed the front brakes
05 tacoma trd sport with graphics, chrome kit, aftermarket tail lights, cleared head lights, dual exshault, volant cold air intake with ram air scoop, throttle body spacer, 6 inch fabtech lift, 34.5 inch tires , 17x9 dick cepeck dc1 black and sliver rims, westin bull bar and step bars, and a aftermarket toyota emblem, 5 percent tint in the back and side windows and 50 percent on the driver and passenger windows
Tacoberfest 09 pics comming soon
Tacoholic
so hopefully I'll be changing my motor mounts tomorrow. I also need to air up the tires, and trace down the ground in the efi2 10amp fuse:( I'll post up tomorrow if I get a chance.
so here's what I did tonight:
So I've removed all of the rebound in my coilovers, and most of it in my bypasses. I had to use triple limit straps since I kept breaking singles. Now the limit straps don't break but can you believe how my arm is peeling apart like a can of cat food? Both sides are like this after this weekend. This is the driver side, it's a little worse than the passenger side. This is the second time the 1/8" plate on these arms has broken, last time it was from impact, this time it's pulling apart from rebound.
This has gotten ridiculous! I'm going to fix this problem once and for all. I'll post a build link here likely tomorrow after I build a jig, and then new armsCan we say dirtydeedsindustries.com Long Travel Suspension?
DirtyDeedsIndustries.com Specializing in high performance custom exhaust and suspension systems.
So here's the difference between stock and 3.5" over. No change in pivot points except that the lower bj is pushed out 3.5". I'll start a build thread tomorrow, signing off for the night.
DirtyDeedsIndustries.com Specializing in high performance custom exhaust and suspension systems.
i put 31x10.5x16 Kelly Safari Trax tires on my 95 4Runner today! new front brakes going on tomorrow
Posting Permissions
Reply With Quote
