No high-beams
I just purchased a 1994 pickup and the high-beams didn't work. So I replaced both headlight assemblies thinking that might cure the problem. Well, it didn't. The blue icon on the dash still lights up when I select brights, but the lights completely shut off at the same time. Ideas?
I'm pretty sure you have dual purpose bulbs right? ( One bulb used for highs and lows) if so, check your relays, it wouldn't hurt to check your fuses but since the lows work they're probably fine, after that maybe check the headlight switch.
2011 Toyota Tundra CrewMax SR5, 5.7 V8, Chrome Door Handles,
International Brotherhood of Tundra Owners
You have a bad relay its not the switch cause you are getting power to the light in the dash but nothing for high beams sounds to me thr relay contacts are shot
05 tacoma trd sport with graphics, chrome kit, aftermarket tail lights, cleared head lights, dual exshault, volant cold air intake with ram air scoop, throttle body spacer, 6 inch fabtech lift, 34.5 inch tires , 17x9 dick cepeck dc1 black and sliver rims, westin bull bar and step bars, and a aftermarket toyota emblem, 5 percent tint in the back and side windows and 50 percent on the driver and passenger windows
Tacoberfest 09 pics comming soon
Tacoholic
Thanks guys, problem solved.
was it the relay or fuses?
Glad to know you got it fixed.
"Never give up, never give in" - Winston Churchill
I'm actually interested in knowing what caused this.
I'm Jenny from Seattle
Outdoors girl, love camping and being on the water. - Photo Album soon to come!
2006 Toyota Tacoma! 40,000 miles!
Posting Permissions
Reply With Quote
