Toyota Truck Club
YOUR PREMIER TOYOTA TRUCK FORUM
Founded in 2005 ~ We're the #1 Toyota Truck & SUV Forum.
Tacoma | Tundra | 4Runner | Land Cruiser | RAV4 | Sienna
Results 1 to 8 of 8

Thread: Best lift option for me??

      
  1. #1

    Default Best lift option for me??

    I have a 06 tacoma sr5 4x4. Im willing to spend around 600 or so on a lift. I want to get around 3" inches of lift and put what I can as far as tire size. Do not need anything for hardcore offroading Ill be 95% on pavement.. I been looking at bilstein 5100's for front but thats only 2.5" of lift up front. Maybe ome in front?? Ill probably go with the toytech 3" aal's for the rear. what should I do in the front to get about 3"?Any suggestions???
    Last edited by mcnair327; 07-07-2009 at 06:20 PM.
    Most ads removed for Registered Users

  2. #2
    Moderator 1 bad tacoma's Avatar
    Join Date
    Dec 2008
    Location
    Rustburg, Virginia, United States
    Posts
    681

    Default

    Quote Originally Posted by mcnair327 View Post
    I have a 06 tacoma sr5 4x4. Im willing to spend around 600 or so on a lift. I want to get around 3" inches of lift and put what I can as far as tire size. Do not need anything for hardcore offroading Ill be 95% on pavement.. I been looking at bilstein 5100's for front but thats only 2.5" of lift up front. Maybe ome in front?? Ill probably go with the toytech 3" aal's for the rear. what should I do in the front to get about 3"?Any suggestions???
    i had the toytec 3 inch under mine and loved it i didnt get the aals for the rear i got blocks instead but its a very good lift for the money thats what i would buy if i was you. very easy to install your self you just need a spring compressor to do it. for tire size that depends on what rims your are going with. now toytec has adjustable coil overs for there lift but if you are looking to spend aropund 600 dollars i wouldnt go that route.

    here are some pics of my 05 tacoma with the toytec 3 inch lift









    and if you ever deside to go with a 6 inch lift you will get the taco lean which is the driver side is a taste lower than the passenger side and there is nothing you can do about it with out spending more money just thought i would throw that tid bit of info in there.

    also you get about 1/4 inch more lift with toytec than you do with procomp
    Last edited by 1 bad tacoma; 07-07-2009 at 08:05 PM.
    05 tacoma trd sport with graphics, chrome kit, aftermarket tail lights, cleared head lights, dual exshault, volant cold air intake with ram air scoop, throttle body spacer, 6 inch fabtech lift, 34.5 inch tires , 17x9 dick cepeck dc1 black and sliver rims, westin bull bar and step bars, and a aftermarket toyota emblem, 5 percent tint in the back and side windows and 50 percent on the driver and passenger windows

    Tacoberfest 09 pics comming soon



    Tacoholic

  3. #3

    Default

    i know rough country makes 4 in lift kits if that's not too high but i'm not sure how the ride quality is or about how much they cost. I found this site a little while ago but have no experience with them, http://www.toyotalift-kits-4you.com/
    2011 Toyota Tundra CrewMax SR5, 5.7 V8, Chrome Door Handles,


    International Brotherhood of Tundra Owners

  4. #4
    Moderator 1 bad tacoma's Avatar
    Join Date
    Dec 2008
    Location
    Rustburg, Virginia, United States
    Posts
    681

    Default

    Quote Originally Posted by 5.7yotafan View Post
    i know rough country makes 4 in lift kits if that's not too high but i'm not sure how the ride quality is or about how much they cost. I found this site a little while ago but have no experience with them, http://www.toyotalift-kits-4you.com/
    you sure about that i tried the link but it wouldnt work for me so i googled the lift kit and all i found was 3 inch for that year taco
    05 tacoma trd sport with graphics, chrome kit, aftermarket tail lights, cleared head lights, dual exshault, volant cold air intake with ram air scoop, throttle body spacer, 6 inch fabtech lift, 34.5 inch tires , 17x9 dick cepeck dc1 black and sliver rims, westin bull bar and step bars, and a aftermarket toyota emblem, 5 percent tint in the back and side windows and 50 percent on the driver and passenger windows

    Tacoberfest 09 pics comming soon



    Tacoholic

  5. #5

    Default

    Quote Originally Posted by 1 bad tacoma View Post
    you sure about that i tried the link but it wouldnt work for me so i googled the lift kit and all i found was 3 inch for that year taco
    That's what it said when I pulled it up, so I dunno!
    2011 Toyota Tundra CrewMax SR5, 5.7 V8, Chrome Door Handles,


    International Brotherhood of Tundra Owners

  6. #6
    Moderator 1 bad tacoma's Avatar
    Join Date
    Dec 2008
    Location
    Rustburg, Virginia, United States
    Posts
    681

    Default

    Quote Originally Posted by 5.7yotafan View Post
    That's what it said when I pulled it up, so I dunno!
    I'm not douting you I could be a miss print on there part but I'm thinking if you were going with a 4 inch why not spend the money and go 2 more inches
    05 tacoma trd sport with graphics, chrome kit, aftermarket tail lights, cleared head lights, dual exshault, volant cold air intake with ram air scoop, throttle body spacer, 6 inch fabtech lift, 34.5 inch tires , 17x9 dick cepeck dc1 black and sliver rims, westin bull bar and step bars, and a aftermarket toyota emblem, 5 percent tint in the back and side windows and 50 percent on the driver and passenger windows

    Tacoberfest 09 pics comming soon



    Tacoholic

  7. #7

    Default

    So you had toytech 3" spacer lift or something else in the front

  8. #8
    Moderator 1 bad tacoma's Avatar
    Join Date
    Dec 2008
    Location
    Rustburg, Virginia, United States
    Posts
    681

    Default

    I had the spacer kit cause when I got mine toytec didn't offer adjustable coilovers if they did I would have went with those instead of the spring spacer
    05 tacoma trd sport with graphics, chrome kit, aftermarket tail lights, cleared head lights, dual exshault, volant cold air intake with ram air scoop, throttle body spacer, 6 inch fabtech lift, 34.5 inch tires , 17x9 dick cepeck dc1 black and sliver rims, westin bull bar and step bars, and a aftermarket toyota emblem, 5 percent tint in the back and side windows and 50 percent on the driver and passenger windows

    Tacoberfest 09 pics comming soon



    Tacoholic

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •