DirtyDeedsIndustries.com experimental muffler build

[dirtydeeds]

I used 2.5" flanges to match my Long Tube Headers After welding them to 2.5" aluminized tubing I drilled a couple holes on my neighbors drill press.


Outer core is 5" aluminized tubing from a big rig supply.


These are the ends of the outer body tubes, I cut these out with my plasma, I now have em cut out by my local water jet shop.



This is where it'll be welded



For simplicity I welded the 02 sensor bung to these mufflers. I now make just the muffler and put the bung in the 'h' pipe.



I do these a little different now but here's how I welded it together



packed up



another picture


Done!



Up Close!

[MD_Weems]

I love the in depth pictures with this post too - awesome.